Aerocool 3 x P7 F12 Fans 16.8 Million Colour RGB & P7H1 Hub Kit
The Project 7 Hub1 (P7-H1) uses software to simultaneously control up to five fans (4-pin or 3-pin) and synchronize all Aerocool RGB products and other RGB 4-pin compatible products. It is also compatible with RGB motherboards including ASUS, MSI and Gigabyte to name a few. The hub additionally supports LED outputs of up to 24 Watts.
The P7-F12 blade fins direct airflow to increase air pressure for maximum cooling performance, have reduced air resistance and generate minimal noise thanks to the anti-vibration pads that absorb and dampen vibrations caused by fan rotation in the PC. The fan blades are removable with just a push for easier access to clear dust build up or to individually clean each fan without opening your entire front panel on the PC.
The P7-H1 software is compatible with Windows 7 and newer versions. There are multiple ways to install the hub inside the case using either a Velcro strap, screws or zip ties.
Up to eight individual hubs (P7-H1) can be connected and identified with the built-in switch board through a single motherboard.
The fans are compatible with RGB MBs - Access 16.8 million colours with RGB 4-pin using P7-H1 RGB Fan Hub or other compatible motherboards including Asus Aura, MSI’s Mystic Light Sync and Gigabyte RGB Fusion
Fans maximise performance and generate minimal noise - Fan blade fins direct airflow to increase air pressure for maximum cooling performance and reduce air resistance and minimise noise
Anti-vibration pads - Anti-Vibration pads absorb and dampen vibrations caused by fan rotation
Removable fan blades - Removable fan blades for easier access to clear dust build up
Hub syncs RGB products - Synchronise all Aerocool RGB products and other RGB 4-pin compatible products
Hub outputs up to 24W - Both LED outputs collectively support up to 24 Watts
Hub controls up to five fans - Controls up to five fans compatible with both 4-pin and 3-pin connectors
8 hubs connect to a MB - Up to eight individual hubs (P7-H1) can be connected and identified with the built-in switch board through a single motherboard
Hub works with Win 7 and newer - The P7-H1 RGB Fan Hub software is compatible with Window 7 and newer versions
Ways to install the hub - Multiple ways to install the hub inside the case using Velcro strap, screws or zip ties
Hub Main Function: PWM Fan Speed Control
Hub Connector: 9-Pin USB 2.0
Hub LED Output: 2 Connectors (Expandable)
Hub LED Output (Watt): Up to 24 Watts
Hub Fan Output Port: 5 Ports
Hub Fan Output (Watt): Up to 18 Watts
Hub System Compatibility: Windows 7 and Newer Versions
Hub Software Enabled: LED Light Control
Fan Dimension(L x W x H): 120mm x 120mm x 25mm
Fan Speed: 1200rpm
Fan Starting Voltage: 9V
Fan Rated Voltage: 12V
Fan Rated Current: 0.15 A
Fan Air Pressure: 1.01 mmH2O
Fan Air Flow: 45.8 CFM
Fan Noise Level: 14.5 dBA
Fan Bearing Type: Hydraulic Bearing
Fan MTBF: 60000 hrs